Home

Services

All Type of Bored Piles​

The bored piling works, as required by the specific project element design, are necessary for the foundation support to the sub and superstructure of the specified Project. The piles to be constructed will be of a nominal specified diameter, bored through overlying soils to found in the bearing strata. The piles are designed to resist the loadings provided by the Client’s Representative.

Methods

  • Installation of temporary guide casing
  • Drilling of Pile Borehole
  • Reinforcement cage installation
  • Pouring the concrete
  • Extraction of Temporary Casing Guide

All Type of Shoring Works

Piles Trimming

Construction of cocrete piled foundations includes the requirement to cutting the piles to the correct level to allow the subsequent construction of pile caps or capping beams. The pile cutting process is required to remove all concrete to the specified level, while leaving reinforcing bars protruding to the designed length to allow adequate lap and/or anchorage into subsequent construction.

Sheet Piles

Sheet piles are structural sections that can be interconnected to form a continuous sheet pile wall. Sheet piles rely on their structural stiffness to resist lateral forces due to earth, water, or other loads.
  • Platform preparation
  • Instalation of Temporary guide frame
  • Placing and driving
  • Exacavation and installation of bracing
  • Extraction of sheet pile

Dewatering Work

The removal of water from solid material or soil by wet classification, centrifugation, filtration,or similar solid‐liquid separation processes. Removing or draining water from a riverbed, construction site, caisson, or mine shaft, by pumping or evaporation. This is often done during the site development phase of a major construction project due to a high water table.Usually involves the use of “dewatering” pumps. Methods of dewatering include; WellPoint,Deep Well

Subscribe to our Newsletter

Get all the latest information